Epson SC-T7000 series Service Manual page 134

SC-T7000 series/SC-T5000 series/SC-T3000 series
22. Remove the four FFC clamps on the side of the Rear Main Frame.
FFC Clamps
Figure 3-73. Releasing the FFC (2)
23. Peel off the CR FFC.
Figure 3-74. Releasing the FFC (3)
DISASSEMBLY & ASSEMBLY
Rear Main Frame
CR FFC
Double-sided tape
Disassembly and Assembly Procedure
24. Remove the two FFC clamps from the top of the Board Box.
25. Disconnect the CR FFC from the connector (CN100) of the MAIN BOARD, and
pull it from the hole of the Board Box.
26. Pull out the CR FFC from the Ferrite Core on the Board Box.
CN100
MAIN BOARD
Figure 3-75. Removing the CR FFC (Around the Board Box)
Revision B
FFC Clamps
Ferrite Cores
CR FFC
Confidential
134