Recommended Tools - Epson SC-T7000 series Service Manual

SC-T7000 series/SC-T5000 series/SC-T3000 series

3.1.4 Recommended Tools

To protect this product from damage, use the tools indicated in the following table. For
the tools required to perform the adjustment, refer to "Tools/Consumables for
Adjustments" in Chapter 4.
Table 3-1. Tools
Name Description
4 cm or longer shaft length (The
Phillips screwdriver, No. 1 one with a magnet is
recommended)
25 cm or longer shaft length (The
Phillips screwdriver, No. 2 one with a magnet is
recommended)
Tweezers Nothing in particular
To secure the cable/harness, or for
Acetate tape the protection against the sharp
edge
To prevent staining the printer
Waste cloth
with ink during operation
DISASSEMBLY & ASSEMBLY
Target Part
PRINT HEAD
Some encoders/sensors
Parts in general
Parts in general
Parts in general (Use this tape
when it is removed or when
replacing the part)
INKTUBE
IC HOLDER
DUMPER KIT
PRINT HEAD
PUMP CAP UNIT
Overview
Revision B
70
Confidential