Media Feed Related Checks And Adjustments; Pf Belt Tension Check - Epson SC-T7000 series Service Manual

SC-T7000 series/SC-T5000 series/SC-T3000 series

4.13 Media Feed Related Checks and Adjustments

4.13.1 PF Belt Tension Check

REQUIRED TOOLS
Sonic tensimeter U-507
Any tools to flip the timing belt
STANDARD VALUE
10 ± 3.5 N
EXECUTION MODE
Normal mode
PROCEDURE
1. Remove the following parts in advance.
LEFT UPPER COVER (P. 101)
LEFT LOWER COVER (P. 98)
2. Loosen the two screws that secure the PF motor mounting plate.
3. Move the mounting plate back and forth three times to soften the PF TIMING
BELT.
4. Tighten the two screws to secure the mounting plate.
ADJUSTMENT Media Feed Related Checks and Adjustments
PF motor mounting plate
Figure 4-57. Softening the PF TIMING BELT
Revision B
Fixing screws
262
Confidential