Epson SC-T7000 series Service Manual page 149

SC-T7000 series/SC-T5000 series/SC-T3000 series
13. Remove the screw that secures the Rear Cover.
A) Silver M3x8 S-tite screw with built-in washer: 1 pcs
14. Disengage the boss of the Rear Cover, and remove the Rear Cover.
Boss
Figure 3-97. Removing the Rear Cover
DISASSEMBLY & ASSEMBLY
Back side
Rear Cover
A
Disassembly and Assembly Procedure
15. Disconnect the FFC from the connector of the Maintenance Box Holder.
16. Peel of the FFC from the frame and insert it into the edging saddle.
Back side
Double-sided tape
FFC
Edging saddle
Figure 3-98. Releasing the FFC
Double-sided tape
Maintenance Box Holder Connector
Confidential
Revision B
149