Release The Paper Chains (Cabinet Model) - IBM 6400i Setup Manual

Line matrix printers, cabinet and pedestal

Table of Contents

Remove Shipping Restraints (Cabinet Model)

Release The Paper Chains (Cabinet Model)

Tie Wraps (2)

Figure 12. Back View of Printer Components, Cover Off, Showing the Release of Paper

NOTE: If you have the power paper stacker installed, skip this procedure and

1. Open the cabinet rear door.

2. Cut the tie wraps and release the paper chains from the bags at the top

rear of the printer frame. Remove the tie wraps and bags.

3. Make sure each chain hangs freely with no kinks or knots.

go to "Remove The Shipping Restraints From The Power Paper

Stacker" on page 42.

Paper Chains (8)