Throttle Body Removal - Suzuki TU250X Service Manual

THROTTLE BODY REMOVAL


Once the throttle body has been removed, disassem-
bled or replaced, the TP learned value reset must be
performed using SDS tool with the throttle body
assembled. (4-40)
• Turn the ignition switch OFF.
• Remove the fuel tank. (5-3)
• Remove the frame covers. (8-3)
• Disconnect the STVA lead wire coupler 1, STP sensor lead
wire coupler 2 and wire clamp.
• Disconnect the TP sensor lead wire coupler 3, fuel injector
lead wire coupler 4 and IAP sensor lead wire coupler 5.
• Disconnect the throttle cables 6 from their drum.

After disconnecting the throttle cables, do not snap
the throttle valve from full open to full close. It may
cause damage to the throttle valve and throttle body.
FUEL SYSTEM AND THROTTLE BODY 5-11