Positioning The System - Polycom VSX 7000 Administrator's Manual
Hide thumbs
Also See for VSX 7000:
- Product reference manual (17 pages) ,
- Integrator's reference manual (418 pages) ,
- Administrator's manual (248 pages)
Table of Contents
Advertisement
VSX 7000 Series Administrator's Guide
Positioning the System
20
Before you connect the cables, place the system and its peripherals according to the
planned room layout.
To position the system:
1.
Place the main monitor so that everyone in the room will be able to see it easily.
If the monitor's chassis slopes back sharply, you may need to install feet on the bottom of
the system to stabilize it. The hardware kit you received with the unit includes a pair of feet.
2.
Install the feet on the VSX 7000 set-top, if necessary.
Feet
3.
Place the VSX 7000 set-top on top of the monitor, or as close to it as possible.
Ensure that the set-top lip overlaps the monitor or other surface.
Be sure to remove the packaging collar from around the camera before powering on the
system.
www.polycom.com/videodocumentation
- Quick Links:
- Key Features
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
