Designing General System Behaviors; Configuring System Settings - Polycom VSX 7000 Administrator's Manual

VSX 7000 Series Administrator's Guide

Designing General System Behaviors

Configuring System Settings

70
Configure the general behavior of the system to accommodate your environment:
System Settings
Multipoint Calling
Call Quality Preferences
Call Answer Mode
Passwords and Security Options
Date, Time, and System Location
The System Settings screen provides access to high-level options for the entire
system. For convenience, some of the User Settings options are repeated.
1. Go to System > Admin Settings > General Settings > System Settings.
2. Configure these settings:
Option
System Name
Maximum Time in
Call
Allow Mixed IP and
ISDN calls
Auto-Answer Point
to Point
Auto-Answer
Multipoint
Description
Enter or change the system name in this field. This name appears
on the screen for the far site when you are making calls.
Enter the maximum number of minutes allowed for call length.
When that time has expired, you see a message asking you if you
want to hang up or stay in the call. If you do not answer within one
minute, the call automatically disconnects.
Specifies whether users can make multipoint calls that include
both IP and ISDN sites.
Unchecking this option provides extra security for systems
requiring LAN connectivity while placing encrypted calls over
ISDN lines. If you clear this selection, IP endpoints cannot join
ISDN calls.
Specifies whether to answer incoming point-to-point calls
automatically.
Specifies whether to accept incoming multipoint calls
automatically.
www.polycom.com/videodocumentation