Sending A Message; System Screens Quick Reference - Polycom VSX 7000 Administrator's Manual

VSX 7000 Series Administrator's Guide

Sending a Message

System Screens Quick Reference

88
If you are experiencing difficulties with connectivity or audio, you may want to
send a message to the system that you are managing.
Only the near site can see the message; it is not broadcast to all parties in a call.
To send a message via the VSX web interface:
1. Go to Utilities > Send a Message.
2. In the Send a Message page, enter a message (up to 100 characters in length),
then click Send Message.
The message is displayed for 15 seconds on the screen of the system that you
are managing.
To view information about the system, go to the Home screen and select System.
Then choose the type of information you need:
This choice:
Admin Settings
Diagnostics
System Information
User Settings
Presents this information or capability:
User interface customization, system customization, security,
dialing requirements and network configuration, key-enabled
options, Global Management System information
System status and performance, system tests
Identifying information
System behavior and appearance
www.polycom.com/videodocumentation