© Polycom, Inc.
Configuring Network Use
This chapter describes how to configure the system's network options.
When you power on your system for the first time, the setup wizard detects the
system's IP and ISDN connections and leads you through the minimum
configuration steps required to place a call.
If you need to change any of the initial settings, you can manually adjust them to
accommodate your organization's environment by configuring the screens
covered in this chapter.
Note that if you establish an administrator's password during the setup wizard,
you will need to enter it each time you wish to change advanced settings.
To make sure you have all the information you'll need to configure network options, see
Preparing Your Network for Collaboration, available at
www.polycom.com/videodocumentation.
What's in this Chapter?
3
Page
30
30
31
33
39
41
48
49
49
29