Configuring Pci Boards Automatically; Removing Boards; Installing An Operating System; Single Processor Operating Support - Compaq ProLiant DL380 Setup And Installation Manual

6-8 Compaq ProLiant DL380 Setup and Installation Guide

Configuring PCI Boards Automatically

Removing Boards

Installing an Operating System

Single Processor Operating Support

IMPORTANT: If there is not enough disk space for the entire System Configuration
History Log, the utility deletes log files starting with the oldest files (SYSTEM2.SCI and
SYSTEM2.CHL) until enough disk space is available for the current configuration backup
and history files.
The system ROM automatically configures PCI boards. If a user selection is
required, the system ROM enables the board with its default settings and
provides a POST message advising the user to use the System Configuration
Utility to view or change the default settings. Also, you may use the System
Configuration Utility to change the default automatic settings.
System ROM automatically reconfigures the server after a PCI board, DIMM,
or second processor is removed.
Compaq ProLiant DL380 servers support the following operating systems:
I
Novell NetWare 3.2, 4.2, and 5.
I
NetWare for Small Business 4.2 and 5.0
I
Microsoft Windows NT Server 3.51, 4.0
I
Microsoft NT Enterprise 4.0
I
Microsoft NT Terminal Server 4.0
I
Microsoft BackOffice Small Business Server 4.0, 4.5
I
Microsoft Windows 2000 Server (when available)
I
SCO OpenServer 5.0.4 and 5.05
I
SCO UnixWare 7.01, and 7.1
I
SCO UnixWare 2.1.2 and 2.1.3
I
IBM OS/2 Warp Server and Warp Server Advanced 4.0