Compaq ProLiant DL380 Setup And Installation Manual page 180

4 Compaq ProLiant DL380 Setup and Installation Guide
full-height tape drive See tape
drive
G
getting help See also help
grounding
methods B-2
requirements 2-6
straps specifications B-2
straps, wearing B-2
suggested equipment for B-2
H
half-height tape drive See tape
drive
hard drives 1-12
hot-plug 1.6-inch
configuration,
illustrated 1-3
hot-plug 1-inch configuration,
illustrated 1-3
hot-plug hard drive
configuration 1-3
installation 3-33
Pre-Failure Warranty 1-23
hardware
assembly 3-1
Configuring Hardware
menu 6-5
disassembly 3-1
health logs, server 1-15
heel straps, using B-2
History Log Files,
configuration 6-7
hot-plug
areas, accessing 3-33
power supplies 1-14
redundant power supply
hot-plug hard drive See hard drives
blank 3-36
installation 3-35, 3-37
location 2-30, 5-4
bay location 1-6
I
IBM OS/2 device drivers 6-15
IDE connector
illustrated 5-5
IMD See Integrated Management
Display
IML See Integrated Management
Log (IML)
inner slide, illustrated 2-11
Insight Manager 7-2
INSPECT Utility 2-34, 6-18
installation 5-11
drive guidelines 5-7
options 3-1
sequence for rack model
server 2-6
tools needed for rack model
server 2-9
installing
battery C-1
DLT tape drive
illustrated 3-24
procedure 3-23
dual proccessor operating
system 6-9
expansion boards 2-9
full height device 3-23
half height device 3-22
hot-plug power supply 3-35
mounting bracket assembly for
rack server 2-19
operating system 6-8
options 2-9
processor power module 3-6
rack model server 2-1
server 2-6
single processor operating
system 6-8
integrated 10/100 TX UTP
controller 1-12
integrated cache 1-10
Integrated Management Display
(IMD) 7-1
Integrated Management Log
(IML) 1-17