Compaq ProLiant DL380 Setup And Installation Manual page 110

3-36 Compaq ProLiant DL380 Setup and Installation Guide
2. Open the lever on the cable management arm 1 and swing the arm out
of the way 2.
Figure 3-39. Accessing the hot-plug power supplies
3. Remove the hot-plug power supply blank as shown in the following
figure.
NOTE: The procedures for adding a hot-plug redundant power supply and for replacing a
power supply are virtually identical.
1
Figure 3-40. Removing the hot-plug power supply blank (or power supply)
1
2
2
3