Compaq ProLiant DL380 Setup And Installation Manual page 184

8 Compaq ProLiant DL380 Setup and Installation Guide
Remote Insight Board 1-19
removable
media bays 1-3
media devices
(installation) 3-17
media tray 3-21
removing
expansion boards 3-15
hot-plug power supply 3-36
server rail from outer bracket
rail 2-12
server rail from outer bracket
rail, illustrated 2-12
the removable media tray 3-21
two removable media
trays 3-23
resolving resource conflicts 6-2,
6-8
riser board
brace, illustrated 1-7
expansion slots,
illustrated 1-10
installation with brace 3-15
locating expansion slots 3-11
RJ-45
Fast Ethernet connector 1-5,
2-30, 5-3
ROM upgradability 1-14
ROMPaq utility 1-14, 2-34, 2-36
routine maintenance 2-36
S
SCO OpenServer
device drivers 6-13
SCO UnixWare
device drivers 6-13
screws, thumbscrews 2-27
SCSI
cable termination 3-17
device jumper settings D-3
installation guidelines 3-17
Wide-Ultra 1-9
SCSI cable connectors
illustrated 5-10
SCSI cabling 5-11
SCSI connectors
illustrated 5-4
SCSI devices 5-7
SCSI hard drives
installation 3-33
SCSI IDs
overview 3-34
SCSI ports 1 and 2 5-4
SDRAM memory, defined 1-10
securing
cables to the cable managment
arm 2-32
rack server, illustrated 2-26
serial connector port B
location 1-5
serial connectors A and B 2-30,
5-3
server
bracket installation 2-23
configuration 2-34
cover removal 3-3
installation sequence 2-6
internal components
locations 1-7, 1-8
loading into rack 2-23
management and
configuration 1-15
overview 1-1
rack mounting bracket 2-12
rack slide rail assembly 2-12
rear panel connectors 5-3
securing to rack 2-23
turning on the power 2-33
Server Fault Tolerance 1-16