Compaq ProLiant DL380 Setup And Installation Manual page 96

3-22 Compaq ProLiant DL380 Setup and Installation Guide
3. Insert the half-height device into the removable media bay 3 and secure
it to the chassis using a T-15 Torx screw 4.
4
Figure 3-21. Installing a half-height device
4. Connect the two device terminated SCSI cable to the half-height device.
IMPORTANT: If the device is a fast-SCSI-2 device, install a 68- to 50-pin adapter and
connect to the device before connecting the cable.
Figure 3-22. Cabling a half-height drive to port 1 with the two-device
terminated cable
3