Compaq ProLiant DL380 Setup And Installation Manual page 99

7. Reconnect the power cord and power on the server.
8. Reconfigure the server. See Chapter 6, "Server Configuration and
Utilities," for more information.
Installing the Optional Wide Ultra2 SCSI Drive
Cage Option
Installing the optional Wide Ultra2 SCSI drive cage allows you use up to two
additional 1-inch hot-plug Wide Ultra2 drives in your ProLiant DL380 server.
The standard Integrated Smart Array Controller in your server supports the
drive cage and additional hot-plug drives.
Before installing a Wide Ultra2 SCSI drive cage refer to "Accessing
Non-Hot-Plug Areas" in this chapter for instructions on preparing the server.
Follow the instructions above for removing the diskette drive and removable
media trays, then begin installing the drive cage.
1. Remove the CD-ROM cable from the rear of the CD-ROM drive.
2. Remove the diskette drive.
3. Remove the removable media trays.
4. Insert the 2 x 1-inch Wide Ultra2 SCSI drive cage into the removable
media area using the guides for proper positioning.
Figure 3-26. Inserting the 2 x 1-inch Ultra2 SCSI drive cage
Installing Hardware Options 3-25