Compaq ProLiant DL380 Setup And Installation Manual page 100

3-26 Compaq ProLiant DL380 Setup and Installation Guide
5. Install the drive cage 1 and secure the cage to the chassis with the
access screws 2.
1
Figure 3-27. Securing the 2 x 1-inch Ultra2 SCSI drive cage
6. Attach the power cable to the power connector 3 on the new drive cage.
7. Connect the point-to-point SCSI cable 4 from SCSI port 2 to the
2 x 1-inch Wide Ultra2 SCSI drive cage.
Figure 3-28. Attaching the power cable and point-to-point SCSI cable
2
3
4