3-24 Compaq ProLiant DL380 Setup and Installation Guide
Insert the Digital Linear Tape (DLT) tape drive into the removable media bay
area 1, and secure it to the bottom of the unit with four T-15 Torx screws 2.
Figure 3-24. Installing a DLT tape drive into the removable media cage
3. Connect the two-device terminated cable to the DLT.
Figure 3-25. Cabling a DLT tape drive to port 1 with the two-device
terminated cable
4. Replace the diskette drive.
5. Replace the server access panel.
6. Push the server into the rack and secure with thumbscrews.
1
2