Compaq ProLiant DL380 Setup And Installation Manual page 146

Server Configuration and Utilities 6-13
and Support Software CD. There are three methods to install the SCO
operating system onto your server:
An integrated Compaq SmartStart installation is available to assist you with
installation of your server by automatically creating the Compaq System
Partition with tools to help configure and diagnose your server. The Compaq
SmartStart and Support Software CD also includes all the SCO UNIX device
drivers for your system.
Alternatively, selecting the Manual Path after starting the Compaq SmartStart
and Support Software CD automatically creates the Compaq System Partition
server and allows you to use SCO's interview process. Depending on your
operating system, it may be necessary to use the Compaq Boot Time Loadable
Drivers (BTLD) diskette or the Compaq Host Bus Adapters (HBA) diskette
along with the Compaq Extended Feature Supplement (EFS) diskette to install
all the driver support. These drivers can be downloaded onto diskettes with
tools available on the Compaq SmartStart and Support Software CD. To create
these diskettes, boot the Compaq SmartStart and Support Software CD and
follow the instructions to create Supplemental Support Software diskettes.
One of the diskettes on the Compaq EFS contains a bootable documentation
diskette. Before attempting to install the SCO UNIX software, run this diskette
and read the README file for the Compaq EFS. It instructs you on how to
use the BTLD or HBA diskettes along with the SCO installation media.