Compaq ProLiant DL380 Setup And Installation Manual page 147

6-14 Compaq ProLiant DL380 Setup and Installation Guide
A third method is similar to the Manual Path method listed above; however,
you must run the Compaq System Configuration Utility to configure the
system, obtain the appropriate EFS for the SCO operating system release, and
follow the manufacturer's installation instructions. Once again, depending on
the operating system, it may be necessary to use the Compaq Boot Time
Loadable Drivers (BTLD) diskette or the Compaq Host Bus Adapters (HBA)
diskette along with the Compaq Extended Feature Supplement (EFS) diskette
to install all the driver support. These utilities can be downloaded onto
diskettes with tools available on the Compaq SmartStart and Support Software
CD.
To create utility diskettes, boot the Compaq SmartStart and Support Software
CD and follow the instructions to create Supplemental Support Software
diskettes. One of the diskettes on the Compaq EFS contains a bootable
documentation diskette. Before attempting to install the SCO UNIX software,
boot this diskette and read the README file for the Compaq EFS. It will
instruct you on how to use the BTLD or HBA diskettes along with the SCO
installation media.
Compaq specific drivers either included with the EFS or packaged with SCO's
media include:
I
Compaq Ethernet/Token Ring Adapter
I
Automatic Server Recovery-2
I
Compaq System Health
I
Compaq ProLiant DL380 Storage System
I
Compaq SCSI and Intelligent Disk Array
I
Compaq Fiber Storage Array Support
I
Compaq Remote Insight Board Support
I
Compaq System Utilities
Special Considerations
Please check the README files on the Compaq SmartStart or EFS Diskettes
or CDs for additional details.