Compaq ProLiant DL380 Setup And Installation Manual page 149

6-16 Compaq ProLiant DL380 Setup and Installation Guide
6. Insert the Compaq SmartStart and Support Software CD into the CD
drive of a system running Microsoft Windows 95 or Microsoft
Windows NT 4.0.
7. In the diskette builder software selection screen, choose Compaq
IBM OS/2 NIC Support Software and Compaq IBM OS/2 Support
Software (SSD).
8. Follow the instructions to create these diskettes.
9. Insert the diskette titled Compaq IBM OS/2 Support Software Diskette
for Novell products, Utilities-1 into the A: drive.
10. Change path to A:
11. Type Viewme at the command prompt.
12. Follow the directions to install Compaq system and storage drivers and
Compaq utilities on your Compaq server.
13. Follow the instructions given in the corresponding section to install
Compaq NIC drivers on your Compaq server.
NOTE: If you do not have easy access to a Windows 95 or Windows NT in your
organization, you can boot the server on which you just installed IBM OS/2 with the
SmartStart and Support Software CD and then choose the Support Software option to
create the SSD Diskettes.