Compaq ProLiant DL380 Setup And Installation Manual page 101

8. Install the point-to-point SCSI cable, provided in the option kit, between
the 2 x 1-inch drive cage 5 and the 4 x 1-inch drive cage 6.
Figure 3-29. Installing the point-to-point SCSI cable (provided in the
2 x 1-inch drive cage option kit)
9. Install the signal cable, provided in the 2 x 1-inch drive cage option kit,
between the 2 x 1-inch drive cage 7 and the 4 x 1-inch drive cage 8.
Figure 3-30. Installing the signal header cable (provided in the 2 x 1-inch
drive cage option kit)
10. Install the CD-ROM cable to the rear of the CD-ROM drive.
11. Replace the diskette drive, replace the server access panel, slide and
secure the server into the rack, and connect external cables.
5
6
7
8
Installing Hardware Options 3-27