Staple Finisher-Y1/Booklet Finisher-Y1/Buffer Pass Unit-L1/2/4 Hole Puncher Unit-A1/2/3 Hole Puncher Unit-A1/4 Hole Puncher Unit-A1 - Canon imagerunner advance C5550i User Manual

Hide thumbs Also See for imagerunner advance C5550i:

Table of Contents

Staple Finisher-Y1/Booklet Finisher-Y1/Buffer Pass Unit-

L1/2/4 Hole Puncher Unit-A1/2/3 Hole Puncher Unit-

A1/4 Hole Puncher Unit-A1

Install "Staple Finisher-Y1" or "Booklet Finisher-Y1" to use the following finish functions.

The printouts are collated into sets arranged in page order of the original.

All printouts of the same original page are grouped together into sets.

Each printout group is shifted in alternating layers.

Staple + Collate

The printouts are collated into sets arranged in page order and stapled (Corner/Double). You can saddle stitch and

output the printouts by using the "Booklet Finisher-Y1."

Staple + Group

All printouts of the same original page are grouped together into sets and stapled (Corner/Double).

The printouts are crimped and bound without using a staple. You can easily split the paper by pressing the crimped

part with your fingers. This function is useful for saving staples and also binding printouts briefly.

For information on the paper sizes that can be used for Staple Free, see

Depending on the usage environment and paper type, the crimped part may be split easily.

Manual Stapling

You can manually staple printed paper by inserting paper in the slit. As an example of use, you can remove staples

bound to the original, copy or scan it, and then staple the original again.

Saddle Fold (Booklet Finisher-Y1 only)

The printouts are folded into half its size. Up to three sheets together can be folded.

If you install the "2/4 Hole Puncher Unit-A1", "2/3 Hole Puncher Unit-A1", or "4 Hole Puncher Unit-A1" in the

"Staple Finisher-Y1" or "Booklet Finisher-Y1," you can punch holes in your printouts.

Specifications(P. 1029) .