Download Cronus License File - RTS Cronus Manual

28 Cronus and AZedit
Window Item
Reset Hold Time button
Select All button
De-select All button
Invert Selection button

Download Cronus License File

To link more than one Cronus system together, you must have linking software installed on the system (normally, this is
loaded at time of purchase). If you are adding a Cronus Intercom System to an existing Cronus matrix, you may need to load a
license file on your existing system.
Each license file is uniquely stamped with the MAC address of the master controller running in the intercom system.
NOTE: The Cronus system must be in Stand Alone state shown on the front panel display. Once the License file is
loaded, the Download License option in the Options menu disappears.
To download the Cronus license file, do the following:
Open AZedit.
1.
From the Options menu, select Download License, and then Select a license file to download.
2.
The Download License submenu appears.
Select the license file to download or use Browse to navigate to the file.
3.
Click Open.
4.
The License file begins to download. Once the file is downloaded, the message "AZedit download successful! The
license file X:\XXX.lic was downloaded and accepted by the intercom.
Click OK.
5.
On the Cronus front panel, you should see Frame 1 appear after the download completes.
Bosch Security Systems, Inc.
Field Type
The
Reset Hold Time
default (.5 seconds).
Select a
1.
time.
Click
2.
The Threshold is reset to the default value.
Select All selects all the list items in the current view.
> Click Select All to select all the items in the current view.
De-select All de-selects all the list items in the current view that are
selected.
> Click De-select All to de-select all ports in the current window
view.
The Invert Selection button reverses the order in which the list is currently
displayed.
> Click Invert Selection to reverse the list of ports from the current
view.
Technical Manual
Description
button resets the hold time of the selected port (s) to
or you want to reset to the default hold
port multiple ports
.
Reset Hold Time
Cronus
F.01U.118.890 Rev. 23