Cronus Menu Structure; Configure Menu; Set Frame Id - RTS Cronus Manual

To open the Cronus menu structure, do the following:
On the front panel of the Cronus system, tap the ENC1 encoder knob.
1.
SET FRAME ID appears.
Turn the ENC1 encoder knob clockwise to scroll forward or counter-clockwise to scroll backwards through the list of
2.
menus.
By scrolling, you see Status or Version.
Tap the ENC1 encoder knob to enter a menu.
3.
Within a menu:
To scroll within a menu, do the following:
Turn the ENC1 encoder knob clockwise to scroll forward, and counter-clockwise to scroll backward through a list of
1.
menus.
Tap the ENC1 encoder knob to enter a menu.
2.
or
Tap the ENC1 encoder knob twice to exit a menu or press the encoder knob for 3 - 5 seconds to exit the menu system.

Configure Menu

Set Frame ID

In a single frame Cronus system, the frame is always Stand Alone (or the Master frame). In a multi-frame system, the first time
Cronus is powered on, each frame shows as Frame 1 and will need to be configured, either manually or by auto-config, to
designate which frame it is.
To set the FRAME ID, do the following:
Tap the ENC1 knob.
1.
Configure appears.
Tap the ENC1 knob.
2.
Frame ID appears.
Tap the ENC1 knob.
3.
Set Frame ID displays.
Tap the ENC1 knob.
4.
SLAVE Frame Set Slave ID displays.
Bosch Security Systems, Inc.

Cronus Menu Structure

Technical Manual
CHAPTER 2
F.01U.118.890 Rev. 23