Ifb Program Ins; I/O Gains; Vox Thresholds - RTS Cronus Manual

16 Cronus Menu Structure
Tap the ENC1 knob.
5.
Auto Config displays. You can either have auto config set the frame or you can manually set the frame ID by turning
the ENC1 knob to scroll through the Frame ID options.
Turn the ENC1 knob to scroll through the choices (Auto Config, Frame ID 2, Frame ID 3, or Frame ID 4).
6.
Tap the ENC1 knob to make your selection.
7.

IFB Program INs

I/O Gains

I/O Gain is the level of audio at which you hear and are heard. There may be occasions where you need to adjust the gain for
some specific intercom port. For example, a belt pack operator may want to monitor a party line, but at a lower level than the
normal intercom volume. Or, a belt pack operator may want to listen to the background music coming from some intercom
input port, but at a reduced level.
To set Gain from the front panel of Cronus, do the following:
Tap the ENC1 knob.
1.
Configure appears.
Tap the ENC1 knob.
2.
Frame ID appears.
Turn the ENC1 knob to I/O Gains.
3.
Tap the ENC1 knob.
4.
Select Port appears. There are 32 ports from which to select.
Turn the ENC1 knob to the port you want.
5.
Tap the ENC1.
6.
IN Gain and OUT Gain appears.
Use the ENC1 knob to adjust the IN Gain.
7.
OR
Use the ENC2 knob to adjust the OUT Gain.
NOTE: You can change the gain levels in AZedit and see the results on Cronus almost immediately. For more
information on gain levels, see Figure 2 on page 6.

Vox Thresholds

Vox Threshold is the level of audio at which a channel becomes active. When the threshold is set, the microphone does not
turn on until the set audio level hits the set threshold. In a high activity area, this prevents a channel from staying active when
no one is around.
To set and enable Vox Thresholds from the front panel of Cronus, do the following:
Tap the ENC1 knob.
1.
Configure appears.
Tap the ENC1 knob.
2.
Frame ID appears.
Turn the ENC1 knob to Vox Thresholds
3.
Threshold appears.
Tap the ENC1 knob.
4.
Select Port appears.
Turn the ENC1 knob to the port to be set.
5.
You can set the thresholds on all 32 ports on the Cronus.
Tap the ENC1 knob to select the port.
6.
Bosch Security Systems, Inc.
Technical Manual
Cronus
F.01U.118.890 Rev. 23