Download Firmware For Cronus - RTS Cronus Manual

Cronus
Once you have entered the IP Address and Network Mask, do the following:
From the Options menu, select Communications.
1.
The Communications window appears.
In the Connection area, select the Network radio button.
2.
In the IP Address field, enter either the Cronus IP Address you wish to connect with, or click the Search button.
3.
The search button scans the network for any Cronus devices. If multiple units are on the network, each will appear in
the list. Select the Cronus you wish to work with.
Click OK.
4.
The Communications window closes.

Download Firmware for Cronus

When firmware is downloaded to Cronus, all the code is put on the Master Controller card. This includes code for the AIO
cards. Therefore, because the Master Controller downloads the firmware for the system and the code for the AIO cards, the
download time is extended while the Master Controller pushes the AIO code out to the appropriate cards.
NOTE: Cronus must have AZedit version 2.06.07 or later.
Also, every time the system is reset or rebooted, the Master Controller card reloads each of the AIO cards with the most
current version of code it is housing.
To download firmware to the Master Controller, do the following:
Open AZedit.
1.
The Keypanels/Ports window appears.
Bosch Security Systems, Inc. Technical Manual
Ethernet Setup for Cronus 31
F.01U.118.890 Rev. 23