RTS Cronus Manual page 81

Cronus 73
Adding 5160 symbols for standalone.
appCreate: autoBootLevel=2
MXP environment is created.
Creating RVON application...
-> Bringing DSP subsystem out of reset...
DSP Daughtercard type is set to NONE - No DSP Daughtercard Found
0000004883 - ROOT: FPGA Version = ff00
0000004890 - ROOT: Channel 2 Remote IP Address is unconfigured
0000004892 - ROOT: Channel 3 Remote IP Address is unconfigured
0000004894 - ROOT: Channel 4 Remote IP Address is unconfigured
0000004895 - ROOT: Channel 5 Remote IP Address is unconfigured
0000004897 - ROOT: Channel 6 Remote IP Address is unconfigured
0000004898 - ROOT: Channel 7 Remote IP Address is unconfigured
About to create Idle Task
About to create Measurement Task
Idle Measurement Tasks created
0000004931 - SMGR: tcid 0, expecting remote device connection
0000004931 - SMGR: tcid 0, added to new socket for device 0
0000004931 - SERV: in0000005049 - DSPA: DSP 0,Image 0:Download done!
0000005055 - DSPA: DSP 1,Image 0:Download done!
0000005155 - NMM: ATPM Update Database Granted
0000005255 - NMM: ATPM Configured for RVON operation
0000005255 - NMM: ATPM Update database done
0000005258 - NMM: 0, states: oper=NORMAL, admin=NORMAL, call=IDLE
0000005259 - NMM: 1, states: oper=NORMAL, admin=NORMAL, call=IDLE
0000005260x97e796f0 (tNetTask): Link is up on EMAC A: 100 MBps and FULL duplex.
0000005763 - RVON: port 0, requesting call permission
0000005763 - UDPT: error - CALL_REQUEST: don't send to an RVON-1 or RVON-IO till
ports known
0000005813 - RVON: port 1, requesting call permission
0000005813 - RVON: port 1, call permission granted, initiate call
0000005814 - RVON: p: CBRX_RVON_ALPHAS
0000005832 - FNRX: CBRX_ANALOG_TRIM
0000005832 - FNRX: CBRX_POLL_DELAYS, ignored
0000005833 - NMM: 1, states: oper=NORMAL, admin=NORMAL, call=SEIZED
0000005833 - NMM: 1, states: oper=NORMAL, admin=NORMAL, call=SETUP
0000005834 - FNRX: CBRX_VOX_PARAMS
Bosch Security Systems, Inc. Technical Manual F.01U.118.890 Rev. 23