Rvon Configuration - RTS Cronus Manual

68

RVON Configuration

RVON cards use ports for communication of audio and control packets. Because routers can be configured to block certain
incoming and outgoing requests, you will need to open the following ports in your network to allow WAN connections to and
from a Network Interface Device. See the table below for the ports that need to be opened for the RVON cards to operate
properly.
Ports necessary for RVON card functionality.
TABLE 7.
Port Port Description
2076 UDP Call Control Signalling
2077 UDP Audio Packets
UDP Telex Proprietary
2079
Signalling
2080 TCP Telex Keypanel Protocol
2081 UDP Pass Through Serial
2082 TCP Firmware Download
2100 Remote Administration
2102 Authentication Server
Below is an example of a router configuration window. Not all routers are configured the same way and may not look exactly
like the example.
Example of a router configuration window.
Figure 8.
NOTE: Linksys supports up to 253 nodes on a router. This is why it is called a Router/Switch because there are WAN
functions like a router as well as having a 4-port LAN switch. It also does not support simultaneous forward and
DHCP.
Bosch Security Systems, Inc.
Technical Manual
Cronus
F.01U.118.890 Rev. 23