Juniper E-Series Installation And User Manual page 77

Cabling E-Series
Routers
Cabling Overview
This chapter describes how to cable an E-series router. Before you cable
the router, ensure that you have completed all installation instructions
identified in previous chapters.
Topic
Cabling Overview
Required Tools, Wires, and Cables
Cabling the SRP I/O Module
Cabling the E-Series Router for Power
Cabling I/O Modules
The Next Step
Cabling an E-series router requires the following main tasks:
1
Familiarize yourself with the module ports, and ensure that you have
the cables and wires needed to complete each cabling procedure (see
Figure 6-1).
2
Read and understand all safety warnings. (See
Installation Guidelines and
3
(Optional) Connect timing ports.
4
Connect the SRP I/O module to the network and to a management
console.
5
Connect grounding wires to the E-series chassis.
Chapter 3,
Requirements.)
6
Page
6-1
6-4
6-5
6-9
6-14
6-20