Juniper E-Series Installation And User Manual page 143

Table 11-3 ERX-310 router specifications (continued)
Category
Telecommunications Certification
a.If the voltage rises above –40 VDC, the system will power off. The system will not power on again until the input
voltage reaches –43 +/– 0.5 VDC.
Specification
• ACA TS 016-1997
• CTR13 – Commission Decision of 9 July 1997 on a common technical
regulation for attachment requirements for terminal equipment interface
for connection to 2048 kbit/s digital structured ONP leased lines:
97/521/EC – OJ No. L215 Vol. 40, August 1997
• CTR24 – Commission Decision of 9 September 1997 on a common
technical regulation for attachment requirements for terminal equipment
interface for connection to 34 Mbit/s digital unstructured and structured
leased lines: 97/639/EC – OJ No. L271 Vol. 40, 3 October 1997
• FCC PART 68
• IECS-003 Issue 3 Class A
• PD7024 – Essential requirements for terminal equipment intended for
connection to unstructured digital leased circuits of the public
telecommunications network using a CCITT recommendation G,703
interface at a rate of 2048 kbit/s with a 75 ohm unbalanced
presentation, 1994
• RTTE Directive (1999/5/EEC)
ERX-310 Router Specifications
E-Series Routers
11-7