Srp I/O Module - Juniper E-Series Installation And User Manual

Figure A-2 SRP I/O module Ethernet port
Table A-2 lists the pinouts for the Ethernet cable's RJ-45 connector.
Table A-2 SRP I/O module – RJ-45 connector pinout
Pin Signal
1 TX +
2 TX –
3 RX +
4 n/c a
5 n/c
6 RX –
7 n/c
8 n/c
a. n/c=no connect
To facilitate connecting the system to a terminal, the system is shipped
with one of each of the following cable adapters:
• DB-9 female to RJ-45 female crossover null modem adapter
• DB-9 female to RJ-45 female straight-through adapter
Table A-3 lists the pinouts for the crossover adapter.

SRP I/O Module

A-3
E-Series Routers