Adding New Sodimms - Juniper E-Series Installation And User Manual

Adding New SODIMMs

a cream ceramic connector at one edge. Some or all of the sockets may
already contain SODIMMs.
1
Push down on the back edge of a SODIMM to release it from the
socket (see Figure
2
Gently pull up and out to disconnect the SODIMM from the
connectors and remove it from the socket.
1
Locate the four SODIMM sockets on the SRP module (see
Figure 9-2 and Figure
remove SODIMMs.
Figure 9-2 SODIMM sockets on the SRP-5 and SRP-10 module
Upgrading Memory on SRP Modules
9-2).
9-3). See the previous section to learn how to
9-7
E-Series Routers