Freestanding Installation - Juniper E-Series Installation And User Manual

4-2 CHAPTER 4
Installing E-Series Routers

Freestanding Installation

When installing the system on a table top or in any other freestanding
mode, be sure to leave enough space around the system for adequate
ventilation. Position the router with easy access to the connections that it
needs for power, local communications, and remote communications.
See Chapter 3, Installation Guidelines and
Chapter 11, System Specifications, for more information.
Warning: Two people are required to lift an E-series router.
Note: All persons handling an E-series router should wear an antistatic device.
Connectors are located on the I/O modules and the power input module
and are installed from the rear of the router (see
Chapter 6, Cabling E-Series
Figure 4-1 ERX-7xx model, rear view
Requirements, and
Figure
Routers, for cabling installation procedures.
4-1). See