Flexible Day Outward Dialing Assignment - Panasonic EASA-PHONE KX-T30810 Installation Manual

~----------'--------- AB= ES-]:
to assign the same on all 8 extensions
1 :::I
1 ~....~Ij
1, 2, 3. _ . . default (all 8 extensEons)
[06] [NEXT] [iB] [C...El [MEMORY][END]
;6]
[NEXT] [NEXT] [C...E] [
,------until the desired extension number appears
s
Through programming, you can select which
extensions may be used for outward dialing by
using the day mode
of
opration.
m
Dial (06).
"DAY: OUT CO" will be displayed.
S Press the NEXT button.
"ENTER EXT NO" will be displayed.
3. Press the NEXT button.
"11: CO 1, 2, 3" will be displayed and "1, 2,
3" will blink.
.
Dial the CO number to be entered.
The desired combination of CO Lines will be
displayed.
To prohibit dialing, press the CLEAR button
instead
of
CO number.
"11: CO....."
will be displayed.
*
Press the MEMORY button.
The blinking LCD will stop.
. Repeat steps 3 to 5, to program the assign-
ment on the other extensions.
7. To return to the initial program mode, press
the END button.
3-11
When you start the programming from step 1,
you may dial the desired extension number
instead of the NEXT button at step 3.
The PREV button allows you to go to the
previous extension for displaying the CO
assignment.
Example: C
ACNE XYZ
Company XYZ wants only extension 11 and 15
* to have access to CO 1, 2 and 3 on outgoing
calls during the day. Extensions 12, 13, 14, 16,
17 and 18 are to be programmed
for access to
only CO 1 and 2.
1. [06] [NEXT] [(NEXT) or (ll)] [l] [2] [3]
[MEMORY]
2. [NEXT] [I] [2] [MEMORY]
3. [NEXT] [l] [2] [MEMORY]
4. [NEXT] [l] [2] [MEMORY]
5. [NEXT] [l] [2] [3] [MEMORY]
6. [NEXT] [I] [2] [MEMORY]
7. [NEXT] [l] [2] [MEMORY]
8. [NEXT] [l] [2] [MEMORY] [END]
e
See page 5-14.