Information You Might Need To Supply To Jtac; Return Procedure - Juniper J2300 Getting Started Manual

J2300, J4300, and J6300 Services Router Getting Started Guide
You can contact JTAC 24 hours a day, seven days a week.
If contacting JTAC by telephone, enter your 11-digit case number followed
by the pound (#) key if this is an existing case, or press the star (*) key to
be routed to the next available support engineer.

Information You Might Need to Supply to JTAC

When requesting support from JTAC by telephone, be prepared to
provide the following information:

Return Procedure

If the problem cannot be resolved by the JTAC technician, an RMA number is
issued. This number is used to track the returned material at the factory and
to return repaired or new components to the customer as needed.
NOTE: Do not return any component to Juniper Networks unless you have first
obtained an RMA number. Juniper Networks reserves the right to refuse shipments
that do not have an RMA. Refused shipments will be returned to the customer via
collect freight.
For more information about return and repair policies, see the customer support
Web page at
For product problems or technical support issues, open a support case using
the Case Manager link at
(within the United States) or 1-408-745-9500 (outside the United States).
When you need to return a component, follow this procedure:
1.
194
Return Procedure
On the Web, using the Case Manager link at
By telephone:
From the US and Canada: 1-888-314-JTAC
From all other locations: 1-408-745-9500
Your existing case number, if you have one
Details of the failure or problem
Type of activity being performed on the router when the problem occurred
Configuration data displayed by one or more
http://www.juniper.net/support/guidelines.html
http://www.juniper.net/support/
Determine the part number and serial number of the component. For
instructions, see "Locating Component Serial Numbers" on page 191.
http://www.juniper.net/support/
commands
show
.
, or call 1-888-314-JTAC