Juniper J2300 Getting Started Manual page 102

J2300, J4300, and J6300 Services Router Getting Started Guide
Table 40 shows how you can change the CLI environment features.
Table 40: Configuring the CLI Environment
Environment CLI Command
Feature
Command set cli
completion complete-on-space
(on | off)
Your working set cli directory
directory path 8
Minutes of idle time set cli idle-time
minutes
Your session prompt set cli prompt string
Restart-after-upgrade set cli
prompt restart-on-upgrade
(on | off)
Number of CLI set cli screen-length
output line displayed length
at once
80
Using the Command-Line Interface
idle-timeout Set maximum idle time before login session ends
prompt Set CLI command prompt string
restart-on-upgrade Set whether CLI prompts to restart after software upgrade
screen-length Set number of lines on screen
screen-width Set number of characters on a line
terminal Set terminal type
Default Setting
on—Pressing Tab or Spacebar
completes a command.
/cf/var/home/remote
Your session never times out unless
your login class specifies a timeout.
user@host >
CLI prompts you to restart the
Services Router after a software
upgrade.
Variable (depends on terminal type).
Options
Set off to allow only Tab for
command completion.
Set on to re-enable Tab and
Spacebar for command
completion.
Replace path with the directory you
want to enter when you log in to the
Services Router.
To enable the timeout feature,
replace timeout with a value
between 1 and 100,000.
To disable the timeout feature,
replace timeout with 0.
Replace string with the prompt you
want. If the prompt contains spaces
or special characters, enclose string in
quotation marks (" ").
Set off to disable the prompt for
the session.
Set on to reenable the prompt.
To change the number of lines
displayed on the screen, replace
length with a value between 1
and 100,000.
To disable the display of a set
number of lines, replace length
with 0. (This feature can be
useful when you are issuing CLI
commands from scripts.)