Juniper J2300 Getting Started Manual page 84

J2300, J4300, and J6300 Services Router Getting Started Guide
For pinouts of cable connectors for G.SHDSL PIMs, see "ADSL and
G.SHDSL RJ-11 Connector Pinout" on page 214.
For alarms, see the configuring and monitoring alarms information in
the J-series Services Router Administration Guide.
For installing and removing a PIM, see "Replacing a PIM" on page 164.
The G.SHDSL PIM has two LEDs to indicate the status of the PIM and its
ports. Table 35 describes the meaning of the LED states.
Table 35: LEDs for G.SHDSL PIMs
Label Color
ONLINE Green
Red
Unlit
Green
STATUS
Red
62
Field-Replaceable PIMs
Local and remote loopback diagnostics
ITU-T G.991.2, ITU-T G.994.1, and ITU-T G.997.1 standards compliance
State
On steadily
Disconnected
Off
On steadily
On steadily
Description
Online with no alarms or failures.
Initialization of the PIM has failed.
PIM is booting.
Online with no alarms or failures.
Active with a local alarm. The router has detected a
failure.