T3 Or E3 Pim - Juniper J2300 Getting Started Manual

Channelized T1 and E1 LEDs indicate PIM and port status. Table 30
describes the meaning of the LED states.
Table 30: LEDs for Channelized T1 and E1 PIMs

T3 or E3 PIM

The T3 (also known as DS3) PIM (Figure 28) and E3 PIM (Figure 29) are
supported on J6300 Services Routers and provide a physical connection to
T3 or E3 network media types. The T3 and E3 PIMs include one physical T3
or E3 port with an integrated data service unit (DSU).
Figure 28: T3 PIM
Label Color
ONLINE Green
Unlit
STATUS Green
Red
Yellow
Unlit
Physical Interface Modules Overview
State Description
On steadily PIM is online and
operational.
Off PIM is not online.
On steadily Port is online with
no alarms or failures,
and the physical layer
is active.
Online Port is active with
a local alarm. The
router has detected
a failure and the
physical layer is
inactive.
Online Port is online with
alarms for remote
failures.
Offline Port is disabled.
Field-Replaceable PIMs
55