Adsl Pim - Juniper J2300 Getting Started Manual

ISDN BRI PIMs provide the following key features:
For pinouts of cable connectors for ISDN PIMs, see "ISDN RJ-45
Connector Pinout" on page 214.
For installing and removing a PIM, see "Replacing a PIM" on page 164.
ISDN LEDs indicate PIM and port status. Table 33 describes the
meaning of the LED states.
Table 33: LEDs for ISDN BRI S/T and U PIMs
Label Color
Green
ONLINE
Green
Amber
Red
Unlit
Green
STATUS
Red
Unlit

ADSL PIM

The ADSL PIM provides a single physical interface to asymmetric digital subscriber
line (ADSL) network media types. The ADSL PIM, one supporting Annex A
(Figure 33) over plain old telephone service (POTS) and the other Annex B (Figure 34)
over ISDN, includes one physical ADSL port for an ATM-over-ADSL connection.
Onboard network processor
Bandwidth on demand
Dial backup
Dial-on-demand routing backup (floating static and dialer watch)
State
Blinking
On steadily
On steadily
Disconnected
Off
On steadily
Disconnected
Off
Physical Interface Modules Overview
Description
Call setup is successful on either the B1 or B2
channel.
ISDN Layer 2 is active.
ISDN Layer 1 is active.
ISDN Layer 2 is unavailable.
BRI interface port is not connected.
ISDN Layer 1 is unavailable.
BRI interface is offline.
PIM is online and operational.
PIM is not operational and needs replacement.
PIM is offline.
Field-Replaceable PIMs
59