Connecting To The Cli Remotely - Juniper J2300 Getting Started Manual

Figure 52: Connecting to the Console Port on the J2300 Services Router
Figure 53: Connecting to the Console Port on the J4300 or J6300 Services Router

Connecting to the CLI Remotely

You can connect to the CLI from a remote location through two dial-up modems: a
modem that is connected to the console port on the Services Router and a second
Serial port
Adapter
Console port
Serial port
Adapter
ST AT US
1
PO RT
ST AT US
PO RT 0
AL AR M IG
CO NF
ON
PO W ER
Console port
Establishing Basic Connectivity
RJ-45 rollover cable
RJ-45 rollover cable
Connecting to a Services Router
121