Juniper J2300 Getting Started Manual page 162

J2300, J4300, and J6300 Services Router Getting Started Guide
Table 51: Secure Access Quick Configuration Summary
Field
Certificates
Certificates
Enable HTTP Access
Enable HTTP Access
Enable HTTP on All Interfaces
HTTP-Enabled Interfaces
HTTPS Web Access
Enable HTTPS Access
HTTPS Certificate
Enable HTTPS on All Interfaces
140
Configuring Secure Web Access with Quick Configuration
Function
Displays digital certificates required for
SSL access to the Services Router.
Allows you to add and delete SSL
certificates.
For information about how to generate
an SSL certificate, see "Generating SSL
Certificates" on page 137.
Enables HTTP access on interfaces.
Enables HTTP access on all interfaces
at one time.
Specifies interfaces on which you want
to enable HTTP access.
Enables HTTPS access on interfaces.
Specifies SSL certificates to be used for
encryption.
This field is available only after you
have created an SSL certificate.
Enables HTTPS on all interfaces at one
time.
Your Action
To add a certificate:
1. Click Add. Opens the Add a Local
Certificate page.
2. Type a name in the Certificate
Name box—for example, new.
3. Paste the generated certificate and
RSA private key in the Certificate
box.
To delete a certificate, select it and click
Delete.
To enable HTTP access, select the
Enable HTTP access check box.
To enable HTTP access on all interfaces,
select the Enable HTTP on All
Interfaces check box.
Select and deselect interfaces by
clicking the direction arrows:
To enable HTTP access on an
interface, add the interface to
the HTTP Interfaces list.
To disable HTTP access on an
interface, add the interface to
the Logical Interfaces list.
To enable HTTPS access, select the
Enable HTTPS access check box.
To specify the HTTPS certificate, select
a certificate from the HTTPS Certificate
list—for example, new.
To enable HTTPS on all interfaces, select
the Enable HTTPS on All Interfaces
check box.