Juniper J2300 Getting Started Manual page 82

J2300, J4300, and J6300 Services Router Getting Started Guide
Figure 33: ADSL 2/2+ Annex A PIM
Figure 34: ADSL 2/2+ Annex B PIM
The ADSL PIM provides the following key features:
For pinouts of cable connectors for ADSL PIMs, see "ADSL and G.SHDSL
RJ-11 Connector Pinout" on page 214.
For alarms, see the configuring and monitoring alarms information in
the J-series Services Router Administration Guide.
For installing and removing a PIM, see "Replacing a PIM" on page 164.
The ADSL PIMs have two LEDs to indicate the status of the PIM and its port.
Table 34 describes the meaning of the LED states.
60
Field-Replaceable PIMs
Onboard network processor
ADSL, ADSL2, and ADSL2+ protocols on the same PIM
"Dying gasp" notification
Asynchronous Transfer Mode (ATM) Adaptation Layer 5 (AAL5) encapsulation