Field-Replaceable Pim Summary - Juniper J2300 Getting Started Manual

J2300, J4300, and J6300 Services Router Getting Started Guide

Field-Replaceable PIM Summary

Table 27 provides software release information, slot and port numbers,
and sample interface names for the field-replaceable PIMs supported
on J4300 and J6300 Services Routers.
Table 27: Field-Replaceable PIM Summary
PIM Software Release
Dual-Port Serial JUNOS 7.0 and later
Dual-Port T1 or E1 JUNOS 7.0 and later
Dual-Port Channelized JUNOS 8.1 and later
T1 or E1
T3 or E3
T3 PIM—JUNOS 7.0 and later
E3 PIM—JUNOS 7.3 and later
Dual-Port Fast Ethernet JUNOS 7.0 and later
4-Port ISDN BRI
JUNOS 7.3 and later
ADSL
ADSL Annex A and
Annex B—JUNOS 7.2 and
later
ADSL 2/2+ Annex A—JUNOS
7.3 and later
ADSL 2/2+ Annex B—JUNOS
7.4 and later
G.SHDSL
JUNOS 7.4 and later
NOTE: PIMs are not hot-swappable. PIMs must be installed in front panel slots
before the system is booted up.
50
Field-Replaceable PIMs
Slot and Port
Numbering
Slots—1 through 6
Ports—0 and 1
Slots—1 through 6
Ports—0 and 1
Slots—1 through 6
Port—0 and 1
Slots—1 through 6
Port—0
Slots—1 through 6
Ports—0 and 1
Slots—1 through 6
Ports—0, 1, 2, and 3
Slots—1 through 6
Port—0
Slots—1 through 6
Ports—0 and 1
Sample Interface Name
(type-pim/0/port)
se-3/0/1
t1-0/0/1
or
e1-0/0/1
ct1-3/0/0
ce1-3/0/0
t3-0/0/0
or
e3-2/0/0
fe-1/0/0
br-1/0/2
at-2/0/0
at-1/0/0