Daikin SkyAir RZQ200 · 250C7Y1B Service Manual page 48

SiBE26-701
Operation sound
Rated operation
sound
Operation sound of
level 1
Operation sound of
level 2
Operation sound of
level 3
Operation sound
Rated operation
sound
Operation sound of
level 1
Operation sound of
level 2
Low noise instructing
Operation sound of
Low noise operation
level 3
by external input
* "Start time" and "End time" must be regarded as a guide because they are estimated based
Field Setting
Image of "Low noise operation" by external input + "Required capacity prior" set by remote
controller
Image of "Low noise operation" by external input + operation during "Nighttime low noise
setting" and "Required capacity prior" set by remote controller
Image of concurrent operation of A and B
Time set with
"Night-time low noise start setting"
PM 8:00 PM 10:00
Set with "Night-time low noise start setting".
(Factory setting is "PM 10:00".)
on the outside air temperature.
If capacity precedence is set in
"Capacity precedence setting",
the fan speed will be increased
according to the load of air
conditioning when load is heavier.
Low noise instructing
Low noise operation by external input
If capacity precedence is set in
"Capacity precedence setting",
the fan speed will be increased
according to the load of air
conditioning when load is heavier.
"Nighttime low noise setting"
by remote controller
"Low noise operation"
by external input
AM 6:00
Set with "Night-time low noise end setting".
(Factory setting is "AM 8:00".)
Field Setting of Outdoor Unit
Operation sound during night-time
low noise mode is instructed can
be set with "Night-time low noise
level setting"
·
The left figure shows a case of
setting to "Level 3."
·
The factory setting is "Level 2."
Time set with
"Night-time low noise end setting"
Operation noise level is the
"low noise level" set by
remote controller.
·
The left figure shows a case of
setting to "Level 3."
·
The factory setting is "Level 2."
AM 8:00
37