Table of Contents
Advertisement
Administration
Configuring System Settings
Configuring System Settings
STEP 1
STEP 2
STEP 3
Cisco Small Business SG200 Series 8-port Smart Switches Administration Guide
The System Settings page enables you to configure information that identifies the
switch within the network.
To configure system settings:
Click Administration > System Settings in the navigation window.
The System Description is hard-coded in the firmware.
Enter the parameters:
•
System Location—Description of the physical location of the switch. (The
characters ', ", %, and ? are not supported.)
•
System Contact—Contact person for the switch.
•
Hostname—Administratively-assigned name for this managed node. By
convention, this is the fully-qualified domain name of the node. The default
hostname is switch concatenated with the last 6 hex digits of the MAC
address of the switch. Hostname labels contain only letters, digits and
hyphens. Hostname labels cannot begin or end with a hyphen. No other
symbols, punctuation characters, or blank spaces are permitted.
Click Apply. The changes are saved to the Running Configuration.
4
32
Advertisement
Table of Contents
