Table of Contents
Advertisement
Security
802. 1 X
Cisco Small Business SG200 Series 8-port Smart Switches Administration Guide
•
Re-Authentication Period—The interval between reauthentication
attempts. The range is 300–4294967295 seconds. The default is 3600
seconds.
•
Re-Authenticate Now—Forces immediate port reauthentication, when
selected.
•
Authenticator State—The current port authorization state. Possible states
are: Initialize, Disconnected, Connecting, Authenticating, Authenticated,
Aborting, Held, Force Authenticate, and Force Unauthenticate.
•
Backend State—The current state of the backend authentication state
machine. Possible values are: Request, Response, Success, Fail, Timeout,
Idle, and Initialize.
•
Quiet Period—Amount of time that the switch remains in the quiet state
following a failed authentication exchange. During the quiet period, the
switch does not accept or initiate authentication requests. Change the
default value of this command only to adjust for unusual circumstances, such
as unreliable links or specific behavioral problems with certain clients and
authentication servers. To provide a faster response time to the user, enter a
smaller number than the default (60 seconds). The range is 0–65535
seconds.
•
Resending EAP—The amount of time that lapses before EAP requests are
resent. The range is 1–65535 seconds and the default is 30 seconds.
•
Supplicant Timeout—The amount of time that lapses before EAP requests
are resent to supplicants. Change the default value of this command (30
seconds) only to adjust for unusual circumstances, such as unreliable links or
specific behavioral problems with certain clients and authentication servers.
To provide a faster response time to the user, enter a smaller number than the
default. The range is 1–65535 seconds.
•
Server Timeout—The amount of time that lapses before the switch resends
a request to the authentication server. The range is 1–65535 seconds and
the default is 30 seconds.
•
Max EAP Requests—The preconfigured maximum number of times the
switch can send an EAP request before restarting the authentication process
if it does not receive a response.
•
Termination Cause—The reason for termination.
11
149
Advertisement
Table of Contents
