Backing Up The Configuration File And Logs - Cisco SG200 Series Administration Manual

Administration
File Management
STEP 5
!
CAUTION
STEP 1
STEP 2
STEP 3
STEP 4
Cisco Small Business SG200 Series 8-port Smart Switches Administration Guide
• Source File Name—For TFTP, specify the filename, including the path. For
HTTP, browse to select the file from your computer.
• Destination File Type—Select one of the following options:
- Startup Configuration—If the specified configuration file is valid, then it
will replace the current Startup Configuration file. It will be the active
configuration file when you reboot.
- Backup Configuration—The specified file will replace the current
backup configuration file.
Click Apply to begin the upgrade. A progress bar indicates the status of the
upgrade.
Ensure that power to the switch remains uninterrupted while the configuration file
is downloading to the switch. If a power failure occurs while downloading the
configuration file, the file is lost and the process must be restarted.

Backing Up the Configuration File and Logs

To back up the configuration file or log:
Click Administration > File Management > Download/Backup Configuration/
Log in the navigation window.
Select the Transfer Method (HTTP or TFTP).
For the Save Action, select Backup.
Enter the parameters:
• TFTP Server (TFTP only)—Specify the IP address of the TFTP server. Or
specify the server's domain name if DNS is enabled in the IP configuration
(see Domain Name System).
• Destination File Name (TFTP only)—Specify a name for the saved file,
including the path on the TFTP server.
• Source File Type—Select the configuration file type:
- Running Configuration—The current configuration, including any
changes applied in the current management session.
4
55