Table of Contents
Advertisement
Administration
LLDP-MED
Cisco Small Business SG200 Series 8-port Smart Switches Administration Guide
•
Management Address—The management port IP address (see the IPv4
Interface page or the IPv6 Interface page).
•
Port ID SubType—The type of the port identifier.
•
Port ID—The port identifier.
•
Port Description—The port description.
•
System Capabilities Enabled—The capabilities that are enabled on the
switch.
•
System Capabilities Supported—The capabilities that are currently
advertised as supported by the switch.
The following switch parameters are advertised in location TLVs.
•
Subtype—The supported type of location information (civic, ELIN, or
coordinate-based).
•
Coordinates—Switch GPS coordinates in hexadecimal format, if
coordinate-based location information type is used.
•
ELIN Address—The ELIN number, if this location information type is used.
•
Country—Country where the city is located, if the civic location information
type is used.
•
City—City where the street is located, if the civic location information type
is used.
•
Street—Street where the building is located, if the civic location information
type is used.
•
Building—Building in which the switch is located, if the civic location
information type is used.
4
77
Advertisement
Table of Contents
