Default Zone Policies; Configuring System Default Zoning Settings - Cisco Nexus 5000 Series Configuration Manual

Enhanced Zoning

Default Zone Policies

To permit or deny traffic in the default zone, perform this task:
SUMMARY STEPS
1. switch# configuration terminal
2. switch(config)# zone default-zone permit vsan vsan-id
3. switch(config)# no zone default-zone permit vsan vsan-id
4. switch(config)# zone commit vsan vsan-id
DETAILED STEPS
Command or Action
Step 1
switch# configuration terminal
Step 2
switch(config)# zone default-zone permit vsan vsan-id
Step 3
switch(config)# no zone default-zone permit vsan
vsan-id
Step 4 switch(config)# zone commit vsan vsan-id

Configuring System Default Zoning Settings

You can configure default settings for default zone policies and full zone distribution for new VSANs on the
switch. To configure switch-wide default settings, perform this task:
SUMMARY STEPS
1. switch# configuration terminal
2. switch(config)# system default zone default-zone permit
3. switch(config)# no system default zone default-zone permit
4. switch(config)# system default zone distribute full
5. switch(config)# no system default zone distribute full
DETAILED STEPS
Command or Action
Step 1 switch# configuration terminal
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide
128
Purpose
Enters configuration mode.
Permits traffic flow to default zone members.
Denies traffic flow to default zone members and reverts
to factory default.
Commits the changes made to the specified VSAN.
Purpose
Enters configuration mode.
Configuring and Managing Zones
OL-xxxxx-xx